This guide details the zones that make up a warehouse, the main types of storage, the layout rules to follow and their impact on productivity.

Why the organization of storage zones is decisive

A logistics warehouse is a sequence of flows: goods arrive, wait, are put away, picked and then shipped. Each zone corresponds to a step in this journey. If zones are poorly sized or poorly placed relative to one another, flows cross, forklifts wait and operators walk instead of picking.

Travel accounts for a major share of order picking time, often estimated at half. It is therefore the first source of productivity gains, and it depends directly on the layout.

The zones of a warehouse

Most warehouses are organized around six main zones, complemented by a few ancillary zones.

The docks

Docks handle the loading and unloading of trucks. Their number and their split between receiving and shipping must match flow peaks, not the average. Docks dedicated to each direction avoid crossings, but mixed docks offer more flexibility on small sites.

The receiving area

Right behind the docks, it is used to unload, check and identify goods before put-away. It must be large enough to absorb half a day of deliveries without spilling over into the aisles. A saturated receiving area is often the first symptom of an undersized warehouse.

Bulk storage

Pallets are placed directly on the floor, sometimes stacked on top of each other. This zone suits bulky, homogeneous products held in large quantities per item. It is economical but requires rigorous management to respect the outbound order of lots.

Pallet racking

Pallet racks make it possible to store at height with direct access to each pallet. It is the classic reserve zone: upper levels hold reserve stock, lower levels are often used for picking.

The picking zone

This is where pickers take the items. It must be compact, close to shipping and organized according to product turnover. It can take the form of light shelving, pallets on the floor, bins or flow racks.

The shipping area

Orders are packed, checked, labeled and grouped there by carrier or by route. It is sized on the volume of the departure peak, usually at the end of the day.

Ancillary zones

To be planned from the design stage: customer returns, quarantine for non-compliant products, storage of packaging and empty pallets, forklift charging, and specific zones for hazardous or temperature-controlled products.

The main types of storage

The choice of storage type depends on the number of items, the quantity per item, turnover and the clear height available under the ceiling.

Type of storagePrincipleSuited forLimit
Floor block stackingPallets placed and stacked on the floorFew items, large volumesPoor use of height
Conventional pallet rackingRacks with direct access to each palletLarge number of itemsLots of aisle space
Drive-in rackingPallets stored in depth on railsHomogeneous products in large quantitiesAccess limited to the first pallet
Flow rackingInclined rollers, the pallet moves forward by gravityHigh turnover, first in first outHigh installation cost
Light shelvingShelves for cartons and partsPiece pickingLight loads only
MezzanineIntermediate floor above ground levelGaining space without movingLoad and safety constraints
Automated storageStacker cranes, shuttles, storage towersHigh volumes and high throughputMajor investment, low flexibility

Layout rules

A good layout starts from actual flows, not from the building plan.

Classify products by turnover (ABC method)

The ABC method ranks items by number of picks. A small share of items, the A products, usually generates the majority of outbound movements. They are placed as close as possible to shipping and at waist height. C products, rarely ordered, go to the most distant or highest locations.

Choose the flow direction

Three layouts are common. In a U-flow, receiving and shipping are on the same side: docks are shared and fast-moving products stay close to the doors. In an I-flow (straight-through), goods enter on one side and leave on the other: suited to high volumes and cross-docking. In an L-flow, receiving and shipping are on two adjacent sides, a compromise for constrained buildings.

Separate reserve and picking

Storing reserve stock at height and picking stock at floor level keeps the picking zone compact. Picking locations must then be replenished before they run empty, ideally outside peak hours.

Comply with safety constraints

Aisle width depends on the type of forklift used and the manufacturer’s recommendations. Emergency exits, clearances from sprinklers, separation of incompatible products and floor markings must be built into the plan from the start, not added afterwards.

The impact of storage zones on productivity

An outdated layout is quickly spotted on the ground.

SymptomProbable cause
Pallets waiting at the dockUndersized receiving area or put-away too slow
Pickers crossing the whole warehouseFast-moving products poorly placed
Picking stockouts while stock existsPoorly organized replenishment
Forklift crossings and near missesInbound and outbound flows crossing
Locations full of dormant itemsNo regular review of the layout

These problems have a direct cost on warehouse profitability: lost hours, errors, poorly used space.

Rethinking your storage zones in 5 steps

  1. Measure actual flows: volumes received and shipped, number of lines per order, hourly peaks.
  2. Classify items by turnover and volume (ABC combined with product format).
  3. Size each zone on peaks, not on the average.
  4. Reassign locations, starting with A products.
  5. Track the effect on productivity and review the layout at least twice a year, or whenever the product range changes.

A WMS makes each of these steps easier: it provides the pick history, suggests locations based on turnover and triggers replenishments. Layout is only one of the levers of logistics optimization, along with processes, inventory and transport.

FAQ about storage zones

What are the zones of a warehouse?

A warehouse generally includes docks, a receiving area, a bulk storage zone, pallet racking, a picking zone and a shipping area, complemented by zones for returns, quarantine and packaging storage.

What are the different types of storage?

The main types of storage are floor block stacking, conventional pallet racking, drive-in racking, flow racking, light shelving, mezzanines and automated storage.

How do you organize a warehouse’s storage zones?

Start from actual flows, classify products by turnover with the ABC method, place the most requested products close to shipping, separate reserve and picking, and size each zone on activity peaks.

What is the ABC method in a warehouse?

The ABC method ranks items by number of picks. A products, the most requested, are placed in the most accessible locations; C products, the least requested, in the most distant ones.